BARBIEOLDNEWGREENREDO--JUST A GRANNY HAVING FUN WITH DOLLS< DIORAMAS STORIES AND DIY

BARBIEOLDNEWGREENREDO

Upscale your Dollar Store Tree for Dolls!


Ad-Free Blog

Hi! 
The dollar store holiday trees are great, but they are a bit big and sparse to look in scale with our  dolls.

barbieoldnewgreenredo

Opal is a 11 1/2" Barbie...and well the branches are big and open..and it's so wide, will it fit in the house?

barbieoldnewgreenredo

These trees come in a variety of colors, if your local store has them in stock. I tried to do a video of this for a Halloween tree....but holding a camera, talking and doing a demo are too hard for my old hands and brain, apparently. So back to photos and text.

barbieoldnewgreenredo

Here is the tree viewed from the top down...it is almost 11" across. Most doll spaces are only 12" deep in Mattel houses, maybe a bit more in homemade displays. This tree would take up more than half the space or depth in a house or display.

barbieoldnewgreenredo

On the right is a second tree I have trimmed. This is an easy project, you need a clippers, a ruler, a low-melt glue gun and glue sticks. Now to make it beautiful and ~!FULL!~

Assemble your tree. Pull down the branches straight out, going around in a circle one branch at a time.  Once that is done from bottom to top, you are ready to trim.


barbieoldnewgreenredo

On the bottom row, clip the branch about 3" off. This doesn't have to be exact, but it helps to be close.

barbieoldnewgreenredo

Keep your branch clippings in a separate pile for each level of the tree.

barbieoldnewgreenredo

The second tier up, clip 2 to 2 1/2" off, and place these in a second pile.

barbieoldnewgreenredo

barbieoldnewgreenredo

The third tier, just clip 1 1/2 to 2" off, and place in another pile.

barbieoldnewgreenredo

The top tiers, clip 1 1/2" and put in the fourth pile. The tippy-top branch cut in half and put with the first pile.

barbieoldnewgreenredo

Now you are ready to make your tree full and fluffy. Each branch will have a flatter side. Starting with your first pile and the bottom pieces, place a big squeeze of glue on the flat side at the bottom of the cutting--

barbieoldnewgreenredo

You can see, this is a good gob of glue. 

barbieoldnewgreenredo

Turn it over, glue side down and place the hot cutting half way inside the bottom branch at a 45 degree angle and hold pressing down. Watch your fingers, though cool melt will cool off quickly.

barbieoldnewgreenredo

Turning the tree, apply all cuttings the same way....here is the tree before adjusting the branches all the glued on branches. Adjust by moving the alternate branches up and down by going around in a circle, push down, pull up...go on to next level and do the same.

barbieoldnewgreenredo

Opal standing in front of her full fluffy  tree, that now measures 7-8" across, a good scale and ready to decorate!

Opal: Don't forget to put your lights on first...this is so classy now! And, this gorgeous tree will actually fit in our condo!

Special NOTE: Do not store anything made with hot glue in an attic or garage...the temps will be too high, and you end up with everything a mess. 

Tools and supplies needed:
Dollar store tree
Wire clippers
Cool-melt glue gun
Ruler 


Please Share your dolly holiday DIY's in the comments, links are fine if they aren't advertising!

If you enjoyed this post(s), please join me by email- at 
FOLLOW IT---upper right hand corner.

I have not been paid or reimbursed in anyway for my opinions or products shown, or from where I shop. 










 

12 comments:

  1. I liked how your tree turned out! I also like seeing the two trees side-by-side with the black background! It looked like a night in a snowy forest just add a with blanket! The trees side-by-side were a great contrast to each other like you would see in nature.

    Can you put them back in the box for storage for next year once you have altered them? I have normally used the green trees and green garland to fill it out. I always look forward to your posts!

    ReplyDelete
    Replies
    1. Thanks so much, MsLeo...I'm pretty sure they would go back in the box as well as any tree does...LMAO...of course I do store mine Top to bottoms criss cross in totes, decorated, so they seem to last pretty well that way.Storage---not in a garage or attic...hot glue isn't stable enough, you could use E-6000, but I think that would be very messy!? I hope that helps.

      Delete
    2. I purchased a white tree this year and will use this post as a guide for my tree. I'll let you know how it turns out.

      Delete
    3. Hi, Mrs,. Leo, I think I have 4 or so to do for this year, will use them for raffle prizes at my doll group...hope to post their progress, also! Thanks for following up, always curious if any of this stuff goes out to real people in cyber space, LOL.

      Delete
  2. Your tree turned out great Sandi! Now the dolls are ready to deck the halls:@) Happy Thanksgiving Week!!!

    ReplyDelete
    Replies
    1. Same to you Lynn, I put two of them in the dioramas and they look spectacular! Hugs, and Happy Thanksgiving!

      Delete
  3. Hi, Linda, thanks, yes, I think I will do a bunch next year!!, thanks for visiting!!!Sandi

    ReplyDelete
  4. Great tutorial. I would just as soon follow a tutorial than a video as I can "rewind" (back up) when I need to study it again! Nice inexpensive project with nice results!

    ReplyDelete
    Replies
    1. Thanks, Kathy. I'm just not computer/phone savy enough to do a video I guess. Glad you enjoyed the post, and happy crafting!

      Delete
  5. Clever Sandi! Hmmm, I wonder if I could do that with a spindly real tree in the garden.

    Firing up the glue gun.....

    ReplyDelete
    Replies
    1. Hi, Lulu thanks for stopping by...I replied before but blogger didn't print it! Thanks, Sandi

      Delete
  6. This comment has been removed by the author.

    ReplyDelete

Thanks so much for each and every comment, and I will try and answer any questions you may have.