Ad-Free Blog
Hi, Doll lovers and Christmas Crafters.
At the price of mini trees even at discount places like Tjmax and Home Goods...well, my dolls aren't going to need a $20 unlit tree...so how about a dollar store tree, fixed...you can do an entire decorated, lit tree for under
$5.00. And anyone can do it, even kids with supervision as it needs a hot glue gun.
The dollar store holiday trees are great, but they are a bit big, wide, and sparse to look in scale with our dolls.
![]() |
| barbieoldnewgreenredo |
Opal is a 11 1/2" Barbie...and well the branches are big and open..and it's so wide, will it fit in the house?
![]() |
| barbieoldnewgreenredo |
These trees come in a variety of colors, if your local store has them in stock. I tried to do a video of this for a Halloween tree....but holding a camera, talking and doing a demo are too hard for my old hands and brain, apparently. So back to photos and text.
![]() |
| barbieoldnewgreenredo |
Here is the tree viewed from the top down...it is almost 11" across. Most doll spaces are only 12" deep in Mattel houses, maybe a bit more in homemade displays. This tree would take up more than half the space or depth in a house or display.
![]() |
| barbieoldnewgreenredo |
On the right is a second tree I have trimmed. This is an easy project, you need a clippers, a ruler, a low-melt glue gun and glue sticks. Now to make it beautiful and ~!FULL!~
How to Assemble your tree. Pull down the branches straight out, going around in a circle one branch at a time. Once that is done from bottom to top, you are ready to trim.
You can even sketch on a board or piece of paper behind the tree to give you the desired finished shape and then cut the branches according to the sketch.
I'm on the crazy side and just wing it.
![]() |
| barbieoldnewgreenredo |
On the bottom row, clip the branch about 3" off. This doesn't have to be exact, but it helps to be close.
![]() |
| barbieoldnewgreenredo |
Keep your sized branch clippings in a separate pile sfor each level of the tree.
![]() |
| barbieoldnewgreenredo |
The second tier up, clip 2 to 2 1/2" off, and place these in a second pile.
![]() |
| barbieoldnewgreenredo |
![]() |
| barbieoldnewgreenredo |
The third tier, just clip 1 1/2 to 2" off, and place in another pile.
![]() |
| barbieoldnewgreenredo |
The top tiers, clip 1 1/2" and put in the fourth pile. The tippy-top branch cut in half and put with the first pile.
![]() |
| barbieoldnewgreenredo |
Now you are ready to make your tree full and fluffy. Each branch will have a flatter side. Starting with your first pile and the bottom pieces, place a big squeeze of glue on the flat side at the bottom of the cutting--
![]() |
| barbieoldnewgreenredo |
You can see, this is a good gob of glue.
![]() |
| barbieoldnewgreenredo |
Turn it over, glue side down and place the hot cutting half way inside the bottom branch at a 45 degree angle and hold pressing down. Watch your fingers, though cool melt will cool off quickly. (rubber garden gloves are perfect for protection and the glue peels off the fingers.)
![]() |
| barbieoldnewgreenredo |
Turning the tree, apply all cuttings the same way....here is the tree before adjusting the branches all the glued on branches. Adjust by moving the alternate branches up and down by going around in a circle, push down, pull up...go on to next level and do the same.
![]() |
| barbieoldnewgreenredo |
Opal standing in front of her full fluffy tree, that now measures 7-8" across, a good scale and ready to decorate!
Opal: Don't forget to put your lights on next...this is so classy now! And, this gorgeous tree will actually fit in our condo!
Now that your tree is narrower, you can clip off with a wire cutters some of the base. I sometimes drill a hole in a piece of wood and glue the new base on. But making lovely felt tree skirts can solve the problem of hiding the bases. I've done it both ways.
Here's Vickie and Joe enjoying decorating their tree. Lights, glitter balls and tree skirt under $5.00.
Special NOTE: Do not store anything made with hot glue in an attic or garage...the temps will be too high, and you end up with everything a mess.
Tools and supplies needed:
Dollar store tree
Wire clippers
Cool-melt glue gun
Ruler
optional: mini lights, balls, decor and tree skirt.
Please Share your dolly holiday DIY's in the comments, links are fine if they aren't advertising!
If you enjoyed this post(s), please join me by email- at
FOLLOW IT---upper right hand corner.
I have not been paid or reimbursed in anyway for my opinions or products shown, or from where I shop.
Please Join me at these Fine Blog Parties!
Thank you for your cooperation, Sandi
| barbieoldnewgreenredo |
















No comments:
Post a Comment
Thanks so much for each and every comment, and I will try and answer any questions you may have.