AD-Free Blog
Hi, All.
 |
| barbieoldnewgreenredo |
Armed with my measurement chart, I prepared for battle with some vintage patterns. I had purchased downloads for vintage fashion doll patterns from all the way back into the early 1960's-1980's. Earlier patterns were designed for Barbie, Toni, Sindy, and a few others that were floating around. So, since Colette is very tall and thin(not busty) I chose to work with older patterns as they, with added length, were closer in size than say TNT patterns in the shoulders and hips.
 |
| barbieoldnewgreenredo |
My first project was a little romper from McCall's 6697 from 1974. I thought the longer leg would look great on the Jazz Baby body. And, I knew I could easily add height to the waist piece.
 |
| barbieoldnewgreenredo |
So, far so good, the shorts fit very well. I did fold a little excess at the back seams and pressed the edges under.
 |
| barbieoldnewgreenredo |
Instead of gathering I made a deep pleat for the bust, thinking that would lie flatter on the Jazz Baby trimmer figure, trying on all the while.
 |
| barbieoldnewgreenredo |
The added an additional 3/8" height to the waistband was perfect.
 |
| barbieoldnewgreenredo |
I used a zig-zag stitch hems to blend in with the pattern. All the seams are the recommended 1/4".
 |
| barbieoldnewgreenredo |
And of course Colette is happy since her signature necklace looks great with the diving neckline.
When downloading files from pattern sellers, I have found inconsistencies in how accurate they print out. I recommend checking your measurements on ALL downloaded patterns---every page...as there will be discrepancies. There are multiple dealers for downloaded patterns on Etsy.
Patterns in stores are now $15-20 or so, downloads are much cheaper, but for patterns out of print or a certain number of years old.
 |
| barbieoldnewgreenredo |
I thought that jacket above the pink-bell bottoms had some great lines. I chose a mini-dot print, dots are always fresh and clean and lined in white, this would be classy enough for Colette's tastes. Testing the pattern against the doll, I extended the length on each piece almost 3/8".
I also followed the angle of the sleeve edge in to the side---by .... and cut the sides in by a full 1/4". This means the entire jacket will be 1" narrower.
Lining the jacket with white, nicely finished the sleeve edges, the collar edges, neck edges and front. Do all this before sewing up the sides and after trimming and clipping all the edges, you can turn it all out. Then sew the side seams, and hand finish the bottom edge/or blind stitch on the machine. I didn't want any stitching to show on the white inside, so I used white thread. Any white stitches showing on the black were easily touched up with a permanent marker pen.
 |
| barbieoldnewgreenredo |
 |
| barbieoldnewgreenredo |
For the Pants I used Simplicity 6901 from 1963. This is before TNT and fat legs...and better for the hip measurements of Jazz Baby. This is the lavender pant in the I view to the left. I added a full 3/4"+ to the length, and reduced the darts just a bit. 1974 barbie was very small in the waist.
I really like these pants have enough butt room for the dolls to sit down. I like this pattern because it sits a bit higher than bought clothing for that reason. You can taper the legs on the inside as much as you want...just make sure you can get the doll's leg through the bottom. This will be my go-to pattern for woven fabrics.
 |
| bbarbieoldnewgreenredo |
I added a fabric tie (cut on the bias) and lined with the white.
 |
| barbieoldnewgreenredo |
One thing about dress styles, they come and go and come in style again.---and this winged shoulder is definitely classy look, anytime.
 |
| barbieoldnewgreenredo |
I'm sure this would work for any doll today, with the proper fitting.
 |
| barbieoldnewgreenredo |
I used the top from the 6901 pattern for this fabric. I didn't add length as the pattern ran long to begin with. I did cut in to the sides a full 3/8" though. this gave a slimmer body and still leaving plenty of room.
 |
| barbieoldnewgreenredo |
I used two snaps to hold this together and did all edges with a straight top stitch.
 |
| barbieoldnewgreenredo |
I used the 6901 pants again for the stretch dark denim, again tapering the leg in from the inside leg seam, tapering from the crotch to the bottom leg edge.
 |
| barbieoldnewgreenredo |
Colette thinks they are nice and slim on her long legs. I hand hem the bottom edges.
 |
| barbieoldnewgreenredo |
The next project is a dress from a purchased original McCall's 6232 from 2010, so post TNT body, and using Barbie's current body shape. I chose the silver purple woven fabric for a cocktail dress. I extended the length of the skirt by an 1" at mid thigh on both pieces.
 |
| barbieoldnewgreenredo |
If I make this again, I will do a full length fold on the pattern to bring the back in just a bit. Other than that, everything is pretty much to pattern.
I also cut out a similar dress to compare for knits McCall's 6876 which was a downloaded pattern originally from 1994. Definitely styled for the TNT body, I kept this in mind while fitting the pattern. I extended the body 1/4" below the bust, and 1/4" below the hip as TNT's are taller than the original body type. I also cut the armholes up a full 1/4" tapering from 0" to 1/4" at the neck seam. I fitted the original neck piece to the new images.
 |
| barbieoldnewgreenredo |
The beauty of working with knits as they are a bit more forgiving and ususally don't unravel. This sequin looking fabric was quite light-weight and gave my machine some issues. Eventually I found the needle would become gummed up from going through the plastic 'sequins', and had to be cleaned regularly.
I ended up hand sewing all the edges and the neck piece.
 |
| barbieoldnewgreenredo |
Colette likes the cut-up leg, of course you can let it go as high as you want.
 |
| barbieoldnewgreenredo |
The top could be smaller across the bust. Since I took off the extra 1/4" at the shoulder, I suppose I could tighten the bodice from the center front, if I use this again. (Which I will) this is a classic style and certainly still usable for a 'performer' that my doll is.
 |
| barbieoldnewgreenredo |
The back looks great and the lines are fine. I did roll an extra bit in the turning the back slit and used one hook and eye at the top.
 |
| barbieoldnewgreenredo |
Colette says, magnifique'!
Tips---for adapting patterns for your dolls, measure-measure-measure, everything. I'm not going to make a recommendation for any one company with down-load patterns, as I found discrepancies with all of them.
You may have to adjust your printers parameters and % to get an accurate pattern. But, then always measure your doll, and the pattern pieces.
|
| barbieoldnewgreenredo |
I will eventually (when perfected) post the altered pattern pieces for the Jazz Baby, but I hope this helps to give you an idea how to adjust your own patterns.
Thank you for visiting, I will try and respond to every question and comment. I will be doing further posts on tutorials for the Hotel and contents.
Please follow me at these great blog parties:
Thank you for your cooperation, Sandi
That fashion show was fun Sandi! All of your clothes turned out great and I like the fabric choices, all perfect for a diva. Good tips too! I have two new packs of patterns sitting on my shelf and have been a bit intimidated about trying to make something with them... Maybe you've given me some inspiration:@)
ReplyDeleteOnly tip...it takes lots of time, and basting sometimes is easier than fighting with pins. LOL. Thanks, Sandi
DeleteSandi, this was most interesting. I kept looking to see if the pattern was specifically for dolls or if you had adapted a full scale pattern to the doll. Awhile back, I saw something explaining ow to scale up the pattern pieces printed on the pattern layout sheet into something you could use for the doll. I still have old patterns but I have never tried it out.
ReplyDeleteI love your choice of fabrics, colors and prints for your Jazz Baby. It really suits her personality! You did a great job with this project.
Most of the patterns are downloaded vintage patterns whose copyright has expired. They are quite reasonable that way. Printing out is a challenge, depending on how they were photo'd to begin with. I know I will scan on grid paper...so people can check the size and also adjust their printer. This is an ongoing project, when I have a complete 'successful' wardrobe I will post the patterns that I have adjusted and tweeked...LOL...lots of tweeking. Thanks, Sandi
DeleteSorry, I forgot to say they are all doll clothes patterns, and depending on the year are designed to fit the dolls at that time. Early on their were other dolls besides Barbie that were in the 11 1/2" or so range. I love your blog and all the remakes of the current fashions... and it gave me the fortitude to give my meagre sewing knowledge a try, again.
DeleteWow! I used to sew Barbie clothes for my girls' dolls when they were little, but I lack the patience for working with tiny pieces now! Thanks for sharing at Vintage Charm!
ReplyDeleteHi, I confess I bought some regualar Barbie clothes to fit my curvy girls yesterday. You are right small stuff is a challenge, but nothing fits this beautiful doll, and I can't afford $50-70 an outfit made by someone else. Thanks for visiting, Sandi
Delete