BARBIEOLDNEWGREENREDO--JUST A GRANNY HAVING FUN WITH DOLLS< DIORAMAS STORIES AND DIY

BARBIEOLDNEWGREENREDO
Showing posts with label doll rooms. Show all posts
Showing posts with label doll rooms. Show all posts

Lighting Miscellaneous Doll Lamps and Updating an old lamp.



 Ad-Free Blog

Last post we worked on the ceiling lights. I had this adorable little lamp that came with a closet package for one of those doll companies not Mattel. 

barbieoldnewgreenredo

But honestly, they make all these adorable lamps but they don't light up. So I thought I would try.

barbieoldnewgreenredo

Like the last post, I'm going to use some mini lights with a mini switch from overseas. I'm using the 39" version of mini lights for this tiny lamp.

barbieoldnewgreenredo

First step with this one is to test the lights and then totally untwist them into a long string.

barbieoldnewgreenredo

I've taken the base off the lamp shade---it is hollow inside.

barbieoldnewgreenredo

I took some of the sticky foam tape and put two pieces around the shaft inside the shade. The idea is to hold the lights from springing out of the shade. I began with the end, and wound the entire @ 30" around the stem.

barbieoldnewgreenredo

You can see here own the wires lights are wound on the foam...worked very well.

barbieoldnewgreenredo

I left one light and the wire to the switch out. Then I put a piece of foam tape on the switch box to hide for turning the light on.

barbieoldnewgreenredo

A little foam tape on the bottom of the lamp and then I mounted the switch unto the side. It will be easy to reach, but out of sight.

barbieoldnewgreenredo

Barbara, your lamp is adorable on this chest! And I love the fabrics on the bed! 


barbieoldnewgreenredo

Today, after 10 months, I found my sewing box with all my threads, pins, and sewing machine supplies---so I can make the new bedding. This bed will have  a hidden drawer underneath for storage! 

barbieoldnewgreenredo

Now unto the gold lamp in the living room. 

I originally made some lamps a few years ago. Directions and the basics are on 

barbieoldnewgreenredo

Today is just an updated change which is more convenient than hiding a box with three batteries behind/under furniture! Upside the batteries in these are small and can easily be changed too, and you can move the lamps now from scene to scene if necessary.

barbieoldnewgreenredo

These are really simple, quick and easy for kids, too.

barbieoldnewgreenredo

Fun look---even better if it is lit.

barbieoldnewgreenredo


To light these up, I used the same technique as in the first one, only with the larger shades, you can leave the switch inside the shade! 

barbieoldnewgreenredo


barbieoldnewgreenredo

On a sheer shade you could double stick tape the switch and the wires onto the post of the lamp under the shade

Happy Lamp Making!!!

I'm not really advertising---BUT, I do have tips on ordering from many of the online stores with foreign merchandise. 

Temu is by far the fastest as they have most of their merchandise on/land here in the US.  I order things in larger quantities, because most of their costs are shipping when buying onesies.  I'm sure I will go through the dozens I have received quickly. And cost wise, the shipping was minimal on buying quantities. 

Downside---you may have to wait for foreign products to arrive. I ordered most of my seasonal merchandise and project stuff in August, when shipping times were less than a month. Just a tip for your shopping! 

Hope these ideas spur your on to make your own 

Light it UP with Lamps! 

If you enjoyed this post(s), please join me by email- at 
FOLLOW IT---upper right hand corner.

I have not been paid or reimbursed in anyway for my opinions or products shown, or from where I shop. 






Light Fixtures for a New BMR Living Room

Ad-Free Blog

After 10 months of moving, scraping, cleaning, sorting, selling, donating, scrabbling from the basement disaster  I am simply exhausted, I'm finally able to play in my doll room...in between trying to decorate, bake, and celebrate these winter Holidays.

My No.3-Barbara Millicent Roberts---senior (I treat her at her real age of 28+64 years...lol, birthed in 1959 as an 18 year old. Gosh that makes me feel old, too.


anyway, she finally has her own spaces...starting as a bedroom and living room.
Making shelves into rooms is always a bit difficult, size wise and dealing with lighting. Here she is deciding on fabrics? with her friends.

barbieoldnewgreenredo

I found two of these crazy elaborate candle 'wraps' in a thrift store...just so fun and over the top, I thought they could be made into coffee tables.


barbieoldnewgreenredo

After I set up the room, though they were too much as tables, then the idea was wow, fabulous ceiling fixtures???? for lighting. One can always use a bit of BLING on the ceiling.

barbieoldnewgreenredo

Back in summer, I ordered a bunch of cheap mini-lights on Temu or Aliexpress...don't remember which.  They have really small switches. I ordered two lengths, 39" and 79" or so. After trying the short ones, I went for the longer for making the light fixtures bright.

barbieoldnewgreenredo

They are LED and very bright, I untwisted the bunch and loosened all the rings of lights.

barbieoldnewgreenredo

In my stashes of plastic pieces I had these containers (previously used as cake domes) from the dollar store. One of these fit perfectly inside the candle frame.
I put the lights inside the container and lidded it, the wire is so thin it easily fit over the edge even while the lid was on.

barbieoldnewgreenredo

Threading the switch through first....up through the top and over to the side. This will be glued to the ceiling, discreetly behind each light fixture.

barbieoldnewgreenredo

Wow, the plastic diffuses the light perfectly and is bright! 

barbieoldnewgreenredo

Back to the left is the roll of Dollar Tree double stick mounting tape I used. I put five pieces on---the frame and light is deceptively light. I have to stick this to white laminate shelving...so it should work. I also put one sticker on the switch to stick behind the light on the ceiling.

barbieoldnewgreenredo

I think these are really going to make the room. It was easy to switch the lights on and off. I've had problems with the magnetic lights with remote switches sticking up anywhere, so this is another option. We will see how long they stay up. 

Since BMR just got her room on Monday, she is slowly moving in, unpacking and making more plans for bedding! 

barbieoldnewgreenredo

I think this layout is flexible and pretty balanced. I've been saving that etagere on the left for five years, waiting to do her room/house. I need to add windows, ceiling trim, door frames--theoretically she is in the Penthouse of the Grand View(Hotel remodeled)

Next...see that cute lamp in the corner----more lighting ideas in the next post. Those mini-lights are too much fun to quit! 

HOW DO YOU LIGHT YOUR DOLL ROOMS/HOUSES!?!

If you enjoyed this post(s), please join me by email- at 
FOLLOW IT---upper right hand corner.

I have not been paid or reimbursed in anyway for my opinions or products shown, or from where I shop. 




 

Easy Backdrops: Reusable, adjustable and Cheap!

 Ad-Free Blog

I promised in March that I would do a post on the backdrops I used for the Doll Club Pajama Party, post here.

barbieoldnewgreenredo

For this large entrance, I used one full foam core panel-30"wide x 17" high for the entrance, mostly because I really wanted to use the arched windows and that super door. 

barbieoldnewgreenredo

The door was a screen-shot stretched tall with black added at the bottom and a bit at the top and I made two mirrored images to make a big door. I'm pretty sure I will fuss with some moldings later on. 

The rest of the basic room backdrops for this project are 2-15"x20"decorated panels. So you get one 2-wall room scene from a piece of 20x30" dollar store foam core. You can of course design yours sized for shelving units for installations, but I'm using these as temporary table top displays.

You can certainly use any sizes you like. It was easy to cut the large pieces of foam core in half with a measuring tape and my large square for a straight edge. 

I cut doors that are at least 12" tall by enlarging photos or cutting them from card stock. I chose narrow doors, 3-4"wide. Dolls are skinny anyway.

My first step is to use white or patterned contact paper to cover the entire panel, overlapping around the back side at least an inch. We planned on using colored plastic table cloths on the tables, which would become floors for the PJ Party displays.

I joined the two separate pieces on the back with heavy white duck tape. Now, you could make an entirely different room on the backsides also---still folding them flat for storage. I would cover the backs again in one layer of contact paper cut to fit to the edges.

barbieoldnewgreenredo

This is inexpensive contact paper from the dollar store. I have noticed they aren't carrying that much anymore, and only carrying sheets. Hardware stores and the internet are still sources for contact paper. 

Why use contact paper? Because it strengthens the foam core, makes it waterproof if you do both sides, and any decor you put on with sticky tape is easily removable or changed. The panels can even be wiped clean with a damp cloth and cleaned if desired.

barbieoldnewgreenredo

This 'tiled' room became a bathroom-dressing room and it was fun to see how it worked out. Sorry this one is blurry! There was a lot of picture taking going on!

I always try and add windows and/or doors to 'rooms' to make it realistic.

barbieoldnewgreenredo

I used computer printed posters of movies from PJ Party themes-these I can remove. I also used stickers/ and scrapbooking embellishments. I buy these at the $$ stores, thrift stores and anywhere I see something that I know I might use.

barbieoldnewgreenredo

Luckily---since I was at my son's house during the demo of the basement, I just took my entire shoebox of embellishments with me. I also took different kinds of tapes, my large square, my paper cutter,  some exacto-tools, and my sticky vinyl rolls I've had for other projects in silver, black, white.

Remember everything is removable if you are working on the contact paper. This turquoise 'tile' pattern was great with the Paris theme items and florals that I had. It would work for bathrooms, porches, and kitchens.

I did a KENS' room with 'wood' paneling. 

barbieoldnewgreenredo

I didn't mess with three dimensional details, but I may go back and redo some moldings around the doors and windows. 
Push pins or brads made perfect door handles.
A blue Sports and Chicago theme bulletin board was perfect for the guys theme.

barbieoldnewgreenredo

The windows I used were actually from catalog pages of different window companies. Some had great scenes in the windows...giving the idea of an outside. I enlarged these to multiple sizes and printed them.

Add a 'bulletin' board made of textured card stock and some stickers and small photos for realism.

You can take pictures of things from the internet, alter/change the color, enlarge or make smaller and use for your own use. You can not sell them without violating copyright. Since I don't advertise or sell my readers anything, I'm comfortable with showing you these rooms.

barbieoldnewgreenredo

This room is half the wood contact paper---I was running out of white for the upper half, so I used some scrapbook paper that was either giraffe or rock pattern. 

I can remove the scrapbook paper at least once, add the white contact paper and then replace it with fresh double-stick tape.

barbieoldnewgreenredo

Our club members placed their furnishings and dolls in the 'rooms' however they wanted to. This vintage Ken looked amazing, and a leather couch and someone brought a cool shelf filled with toys/games/ and goodies.

barbieoldnewgreenredo

This room is one that is completely covered in white contact paper, then the scrapbook paper becomes wall paper. Card stock becomes the door with patterned panels. The patterned embellishments are from a striped paper, cut in strips to use as borders.


barbieoldnewgreenredo

I gave this double window a 2-dimensional canopy treatment. It's a fun room, and yellow is the perfect backdrop for all the pink furniture and dolls I knew that would show up at the meeting.

barbieoldnewgreenredo

If you are doing the room for specific furniture, you can place your doors and windows 
exactly the way you want. 

barbieoldnewgreenredo

I knew the club would have pink which gravitated to this room! The dolls are having a great time! 
Rug is printed felt.

barbieoldnewgreenredo

Even though this contact paper pattern is large, it is delicate and works for wallpaper. I used black trimmed photos of windows. 

barbieoldnewgreenredo

Every bedroom needs a mirrored door. The artists' bulletin board is a personal touch.
barbieoldnewgreenredo

It was great the red and pink items gravitated to this room. Love the Suzy Goose Barbie dressing table. I might use this for a dining room some time with the bulletin board removed.

barbieoldnewgreenredo

In order to do half walls of wallpaper you need 4 sheets of 12x12  paper. Here I only had 3, just  enough to do one wall and then a panel in the middle on the other. I balanced this out with two fancy windows, with turquoise trim. 

barbieoldnewgreenredo

For the PJ Party I used some old catalog pics of sleepwear and another sign. The door is turquoise card stock with a brad handle.

barbieoldnewgreenredo

It looks odd without furniture. But...

barbieoldnewgreenredo

this worked great with all the vintage girls and furniture. The sofa/bed was perfect under the panel. A Yellow floor and pink rugs, made it look like it was all planned! 

barbieoldnewgreenredo

I had to use pink in a room somewhere or it wouldn't be for Barbie. So, the lower half of these panels are a really hot pink card stock, add a strip of 'doll' print girls from some scrapbook paper, and then a strip of striped washi-tape as kick plate trim and border top.

Theme was music and ballet. The door is totally mirrored for 'practice', and the embellishments carry on the theme.

barbieoldnewgreenredo

These are 3-D embellishments that I have had for ages---the stickum was dried up on them...LOL, but double stick foam tape came to the rescue.


barbieoldnewgreenredo

A Paris street scene works perfectly for this room.

barbieoldnewgreenredo

At the meeting, the hot pink table cloth became the floor---the room really works. The light-up dressing table someone brought was PERFECT for a ballet dancer's bedroom. So much fun!


Materials for a 2-wall room 15"tall x 20"wide


1 piece of white foam core 20" x 30" 
Contact paper (your choice) 2 Pc. 18" x 24" for the front sides more if     you do both sides of each piece.
1 15" piece of heavy Duct Tape ( I use white-Duck brand) 
Cardstock for doors and window trims.
Scrapbook paper for wall paper or embellishments 4 pieces of 12 x 12     for wallpaper to cover both sides half way above or below
Embellishments  
Vinyl or Mirror sticky papers ( I use silver for mirrors)
Brads or push pins or mini-handles for door.
Print outs of windows your choice.
Double stick tape ( I use cheap $$$ store tape, which you can actually remove if need to.)
Double stick foam tape-non permanent for pieces you want to add depth to. Also good for sticking wood or heavier items on to walls.

Tools

Scissors
Measuring tape
Square to set and measure your straight lines 
paper cutter if you can't cut a straight line (I can't-LOL)
pencil
pens
A SHARP Exacto-knife for cutting foam core.

If you enjoyed this post please follow this blog by blogger or FOLLOW IT which you will find in the upper right hand corner of this page. 


Thanks always for visiting. 
I will try and respond to every comment and answer every question.

I will be sharing at these fine Parties!





All the opinions and photographs in this blog are my own, I have not been paid or reimbursed in anyway for my opinions, posts or any products shown. Please do not use photos without linking back to this blog without my permission. Thank you for your cooperation, Sandi Magle

Sandi